Skip to content

Rigid Body Motion

Rigid Body Motion

Prescribed motion in the Cartesian solver is defined in numbered motion_N blocks and attached by name either to immersed geometry — surfaces_N { motion name = <name> }, the body moves through the fixed mesh — or to the whole mesh with moving grid motion = <name> in the cartesian section, the ALE moving-grid mode in which every cell moves with the body.

motion_1 {
    name            = rotor             # referenced by surfaces_N { motion name = rotor } or moving grid motion = rotor
    type            = prescribed        # prescribed (default) | deformer | freeflight
    method          = constantrotation  # pointangle (default) | velocityomega | constantrotation
    rpm             = 5400.0            # or angular speed = <rad/s>; signed, right-hand rule about axis
    axis            = [0, 0, 1]         # 3D: required for a whole-domain moving grid
    rotation center = [0, 0, 0]
}
  • name (required): the name other sections use to reference the motion.
  • type: prescribed (default), deformer (structural deformation model) or freeflight (free flight, configured in a freeflight { } sub-block). The rest of this section covers prescribed motion.
  • method: pointangle (default) and velocityomega read a tabulated motion history from filename (velocityomega columns: t, vx, vy, vz, omegax, omegay, omegaz); constantrotation is analytic and needs no file — give exactly one of angular speed (rad/s) or rpm, both signed by the right-hand rule about axis.
  • rotation center (default: the origin), axis (3D, normalized by the solver), translate and scale points (geometry transformation applied with the motion), scale angles, trans angles deg / trans angles rad and yaw pitch roll = true (pointangle only: scaling and offset of the tabulated angles, and the 3D rotation order), do inverse = true (apply the inverse motion).

In progress

This documentation will be published with an upcoming release.