|
Article ID: 138
Last updated: 24 Jun, 2015
This document describes additional TCP settings that can be tuned on high-performance Linux systems. This is intended for 10-Gigabit hosts, but can also be applied to 1-Gigabit hosts. The following steps should be taken in addition to the steps outlined in TCP Performance Tuning for WAN transfers. Configure the following /etc/sysctl.conf settings for faster TCP
A reboot will be needed for changes to /etc/sysctl.conf to take effect, or you can attempt to reload sysctl settings (as root) with sysctl -p. For additional information visit the Energy Science Network website. If you have a 10-Gb system or if you follow these steps and are still getting less than your expected throughput, please contact NAS Control Room staff at support@nas.nasa.gov, and we will work with you on tuning your system to optimize file transfers.
Also read
|