# $Id: input.cntl,v 1.2 2007/10/31 20:19:25 aftosmis Exp $ # $Name: $ # # +--------------------------------------------------------+ # | Steering and Control file for "flowCart" | # | 3D Cut-Cell Cartesian Flow Solver | # +--------------------------------------------------------+ # # NOTE: o Start Comments in this file with the "#" character # o Blocks can come in any order # o info within blocks can come in any order # # rm 10 lawn dart case # $__Case_Information: # ...Specify Free Stream Quantities Mach 1.2 # (double) alpha 0 # (double) - angle of attach beta 0 # (double) - sideslip Angle $__Boundary_Layer_Information: Re_UnitLength 614335. # %g, At Mach 1.2, ReL = 90x10^6, # model is 146.5in, so Re/inch = 614335 BLStopFrac 0.88 # no TE fix is 1. nBLpts 300 # Num. of integration pts for bl at each section Temp_K 300. # Temp in degrees Kelvin (dimensional required) TransLoc 4000000. # transion location in Re_x (ft) auto if (TransLoc<0) # BLaxis CompNum(%d) Dir(%d) x-loc1(%f) x-loc2(%f) loc1(%lf) loc2(%lf) loc3(%lf)...etc BLaxis 1 0 0.000001 0.0000001 15. 45. 75. 105. 135. 165. # X-axis, through (0., 0., 0.,) # BLcut CompNum(%d) Dir(%d) loc1(%lf) loc2(%lf) loc3(%lf)...etc BLcut 2 1 7.5 10. 12.5 15. 17.5 # +y fin BLcut 4 1 -7.5 -10. -12.5 -15. -17.5 # -y fin BLcut 3 2 7.5 10. 12.5 15. 17.5 # +z fin BLcut 5 2 -7.5 -10. -12.5 -15. -17.5 # -z fin $__File_Name_Information: MeshInfo Mesh.c3d.Info # Mesh information file (usually Mesh.c3d.Info) MeshFile Mesh.mg.c3d # Mesh file # --NOTE: ...surface triangulation specified in 'MeshInfo' file ------ $__Solver_Control_Information: # Runge-Kutta Stage Coefficients # stageCoef GradEval ->to run 1st order, set GradEval to 0 in all stages # -------- ------- #RK 0.1918 0 # van Leer 3-stage #RK 0.4929 0 # "optimally damped 2nd order scheme" #RK 1.0 0 # AIAA 89-1933-CP (CFLopt = 1.5 1st order) RK 0.0695 1 # van Leer 5-stage RK 0.1602 0 # "optimally damped 2nd order scheme" RK 0.2898 0 # AIAA 89-1933-CP (CFLopt = 2.5 1st order) RK 0.5060 0 # (CFLopt = ???2nd order) RK 1.0 0 # # (CFLopt = 0.694) # NOTE: GradEval = 0 = no new evaluation at this stage, # GradEval = 1 = Yes, re-evaluate at this stage #nStage 5 ...no longer supported - depricated from v1.3 onward # now set automatically. CFL 1.4 # CFL number Limiter 2 # (int) default is 2, organized in order of increasing # dissipation. # Limiter Type: 0 = no Limiter # 1 = Barth-Jespersen # 2 = van Leer # 3 = sin limiter # 4 = van Albada # 5 = MinMod # FluxFun 0 # (int) - Flux Function: 0 = van Leer # 1 = Colella 1998 # 2 = HLLC (alpha test) Precon 0 # (int) - Preconditioning: 0 = scalar timestep wallBCtype 0 # Cut-Cell Boundary Condition type 0 = Agglomerated Normals # 1 = SubCell Resolution nMGlev 1 # (int) - Number of Multi-Grid levels (1 = single grid) MG_cycleType 2 # (int) - MultiGrid cycletype: 1 = "V-cycle", 2 = "W-cycle" # 'sawtooth' cycle is: nPre = 1, nPost = 0 MG_nPre 1 # (int) - no of pre-smoothing passes in multigrid MG_nPost 1 # (int) - no of post-smoothing passes in multigrid $__Boundary_Conditions: # BC types: 0 = FAR FIELD # 1 = SYMMETRY # 2 = INFLOW (specify all) # 3 = OUTFLOW (simple extrap) Dir_Lo_Hi 0 0 0 # (int) (0/1/2) direction (int) Low BC (int) Hi BC Dir_Lo_Hi 1 0 0 # (int) (0/1/2) direction (int) Low BC (int) Hi BC Dir_Lo_Hi 2 0 0 # (int) (0/1/2) direction (int) Low BC (int) Hi BC $__Convergence_History_reporting: iForce 1 # (int) - Report residual information every iSkip cycles. iHist 1 # (int) - Update 'HistoryFile' every iHist cycles. nOrders 8 # (int) - Num of orders of Magnitude reduction in residual. refArea 113.2612 # based on body Rmax = 6.004, area = 113.2612 $__Partition_Information: nPart 1 # (int) - Number of SubDomains to partition into: type 1 # (int) - Type of partitioning: 1 = SpaceFillingCurve $__Post_Processing: # Pretty printed cutting planes Zslices -0.01 # Yslices -0.01 # ...general format #Xslices (float) (float) ...(float) -- any number of locations #Yslices (float) (float) ...(float) -- any number of locations #Zslices (float) (float) ...(float) -- any number of locations #--------------other RK schemes #---- #RK 0.1481 1 # (double) (0/1) - stage 1 - vLeer's 3-stage scheme #RK 0.4 0 # (double) (0/1) - stage 2 ('optimal 1st order') #RK 1.0 0 # (double) (0/1) - stage 3 AIAA 89-1933-CP #--------------- Integration Schemes for RK ---------------------------- #RK 0.1918 1 # van Leer 3-stage #RK 0.4929 1 # "optimally damped 2nd order scheme" #RK 1.0 0 # AIAA 89-1933-CP (CFLopt = 0.694 2nd order) #----------------------------------------- #RK 0.1084 1 # van Leer 4-stage #RK 0.2602 1 # "optimally damped 2nd order scheme" #RK 0.5052 1 # AIAA 89-1933-CP (CFLopt = ??? 1st order) #RK 1.0 0 # (CFLopt = ??? 2nd order) #----------------------------------------- #RK 0.0695 1 # van Leer 5-stage #RK 0.1602 1 # "optimally damped 2nd order scheme" #RK 0.2898 1 # AIAA 89-1933-CP (CFLopt = ???1st order) #RK 0.5060 1 # (CFLopt = ???2nd order) #RK 1.0 1 # #----------------------------------------- #RK 0.25 1 #RK 0.1666 1 #RK 0.375 0 #RK 0.5 0 #RK 1.0 0 #----------------------------------------- #RK 0.21 1 #RK 0.5 1 #RK 1.0 0 #----------------------------------------- #RK 0.1481 1 #RK 0.4 1 #RK 1.0 0 #-----------------------------------------