#
Extrusion Inputs
#

filename = jaxa_wing_body.cgns
output   = merged

extrusion {
  bc number = 2
  method    = mach aligned
  Mach      = 1.6
  body axis = xaxis
  origin    = [0.0, 0.0, 0.0]
  prism layer {
    mode             = geometric uniform
    initial spacing  = 0.075
    maximum spacing  = 2.
    stretching ratio = 1.15
    height           = 100 # (mach-cone aligned diamond covering body)
  }

}